Posts

How to manage Iron in Swimming Pools

iron in pools, prevent iron stains, iron vs chlorine, remove iron from pool

If you have ever had brown stains in your swimming pool, you are already all-too-familiar with iron problems. In this article, we discuss how iron gets into our water and why it creates stains. Then we will discuss options for managing iron to prevent problems like stains and excessive chlorine demand.

Metal Oxidation creates higher chlorine demand

Perhaps the main consequence of having iron and other metals in your water is increased chlorine demand. Metals are the easiest thing for chlorine to oxidize, and therefore the first things to be oxidized. As oxidants, metals like iron reduce chlorine rapidly. This is why at the beginning of the breakpoint chlorination curve (up to point A on the chart below), there is no noticeable increase of chlorine residuals until these “chlorine reducing compounds” like iron are conquered.

breakpoint chlorine, iron and chlorine, metals reduce chlorine, breakpoint chlorination, breakpoint curve
The first things chlorine attacks are oxidants like metals. Iron is at the top of that list.

Pool operators with iron issues may notice a higher consumption of chlorine, but often it is overlooked. The cost may not be noticeably higher because the pool might be constantly introducing new water with iron in it. In other words, it’s the baseline, and nothing to compare it to. But rest assured, iron absolutely reduces free chlorine in water. Below we will discuss ways to control metals like iron, but first, let’s talk about where iron comes from.

How does iron get into water?

Iron is found in almost all natural water sources. According to a drinking water equipment manufacturer, LennTech, iron is in seawater, rivers, lakes and groundwater too. It up to those of us who manage and treat water to remove it. So iron usually gets into our swimming pools via the tap water. Certain areas of the United States have more iron in their tap water than others. For instance, the upper midwestern states (Ohio, Michigan, Indiana, Illinois, Wisconsin and Minnesota) are challenged with notorious iron problems. Swimming pools in those areas must deal with high levels of iron out of the faucet, or be plagued with iron staining.

rusty pump room, rust in pump room, pool equipment rust, pump strainer rust, pump strainer, corroded pool pump, iron in pools

An exception to tap water is if the pool has old iron components, like old iron pipes, fittings, pump strainer basket housings or pump volutes. If these components have been worn down (like having low pH water flowing through them long enough), iron is sure to find its way into the pool.

There are some exceptions for other metals too, like copper. Copper can get into water from products like copper algaecide, mineral disinfection systems, and from corroding heat exchangers or copper pipes. Pools have turned green from copper before, and sometimes it is mistaken for algae. But let’s get back to iron.

Dissolved iron in water is mainly present as ferrous hydroxide (Fe(OH)2+). We could try to explain the chemical formulas and reactions, but you can read these three sources if you are interested in that level of detail. Source 1, Source 2, or you can go down the Wikipedia rabbit hole as we did. But for this article here, we will try and keep this as simple as possible.

oxidizer, chlorine oxidize, oxidation reduction potential, oxidation, ferrous iron, ferric iron

Usually, iron gets in our swimming pools in a dissolved, soluble state. This means it is mostly invisible and not yet oxidized. If drinking water is chlorinated or chloraminated, however, some of the iron may become oxidized and have a tinge of brown color to it. Iron, when oxidized, turns reddish-brown, and chlorine is consumed (reduced) in the process. If the iron was not yet oxidized in the pipes en route to the swimming pool, it sure will be when it is met with chlorine or a secondary oxidizer like ozone.

Oxidation is what creates staining.

oxidized iron, iron staining, iron stains in pool, iron in pool, how to remove iron stain, high iron in pool
Oxidized iron stains usually present themselves first near return inlets.

Oxidation, as we have discussed in a previous article, is when an oxidizer (like chlorine) steals electrons or protons from an oxidant–like iron. So the key to preventing iron staining is to prevent iron from being oxidized. And to do that, we have a couple of options.

How to prevent iron staining

We can try to remove iron, either from the source water or from the pool itself, and/or we can chemically manage it by using a chelating agent or sequest.

Filter Iron out of the tap water

Iron filters exist and can be installed on pool fill lines. They do need to be replaced periodically; no filter has unlimited capacity. Such iron filters have a wide range in price depending on the removal rate you need, and the flow rate of your water. For instance, a 2″ fill line on a commercial pool will need a larger, more expensive iron filter than a garden hose filling a residential pool.

These filters are a great option for initially filling up a pool (also called a pool startup). The iron–and other metals that may be present in the fill water–will be filtered out prior to adding chlorine to the pool.

Remove Iron from the pool water

If your pool is already full and is challenged with iron problems, there are options to physically remove iron from the pool. Most solutions in the pool business are a two-part process. The first part is to sequester the metals–which basically means to cluster metal ions together into larger particle sizes–and then use a filter that can capture the sequestered metals. Such products do exist on the market already.

If you have a D.E. filter, it could be sufficient in and of itself to capture sequestered metals. Removal would be as easy as doing a media replacement. This method has difficulty removing already-oxidized iron, however. Ferric iron, for example, is not as easy to sequester as ferrous iron. More on that in a moment. In order for this plan to work on existing stains, you would need a way of lifting those stains and getting iron into a state where it can be more easily sequestered or chelated.

Chelate or Sequester iron to prevent oxidation

iron chelation, chelant, chelation, chelation vs sequest, sequestering agent, SC-1000, orenda metal and stain
Chelants like NaturallyFREE binds to (and isolates) individual ions, whereas sequestering agents cluster multiple ions together.

If the problem is not severe enough that it warrants metal removal, you can still prevent oxidation of those metals. Both sequestering agents and chelating agents can bind to metals and hold onto their protons or electrons. If stains already exist, sequestering and chelation is more difficult because the metals are already oxidized and insoluble. An additional step of lifting the stain back into suspension is necessary. To do this, consider using citric acid (also called ascorbic acid, or vitamin C).

naturally free scale and metal sequest

Our chelating agent NaturallyFREE is proven to chelate ferric and ferrous iron, but it is very slow to remove stains. It also works better in warmer water. If the water is colder than about 60ºF, the product will be very slow or even dormant. Keep this in mind when using NaturallyFREE.

Sequestering and chelation do not remove metals from the water. They just bind metals to prevent oxidation and staining. You would need some sort of filter to capture and remove the metals. As mentioned before, Regenerative DE filters can capture chelated or sequestered iron. We have even seen it happen on sand filters, but only a few times.

Conclusion

Stains occur when metals get oxidized and become insoluble. Otherwise, metals like iron are in solution or suspension, and mostly invisible. Metals are introduced to our pools through the tap water, with few exceptions like copper algaecide or corroded metal equipment in the pump room. The options to solve this problem are either a strategy of removal, or chemically isolating the metals to prevent further oxidation. In either case, if stains are already present, a citric/ascorbic acid might be needed to lift the stains. Contact us if you need help deciding what to do.

Introducing Natural Pool Products

Our line of natural pool products simply perform

Have you ever bought a pool chemical that worked (at least to some degree), but maybe wasn’t quite strong enough to get the job done? Or maybe last year it worked, and this year it seems weaker? Perhaps you have a pool that needs a deep clean, but given your time frame and the products available on the market, your hands are tied.

Nobody likes over-promising or under-delivering companies. So we made darn sure we’re not one of them. Natural Pool Products is a brand that simply performs. The products do what we say they do, and they will never be watered down.

“Just do what you say you’re going to do, when you say you’re going to do it.”

Being successful in the pool business–or any business, for that matter–means building trust with customers, vendors, and everyone else in your sphere of influence. People struggle to build trust when they don’t follow through with their promises and deliver results. We live by a simple rule: just do what you say you’re going to do, when you say you’re going to do it.

Natural Pool Products: Simplify pool care

Look at our line of products. You will find our product line is narrow and focused; every product has a purpose. Rather than spit out dozens of product variations, we instead keep our line simple, and allow pool operators and service pros to integrate them into their regimen. Let’s not complicate pool care…instead, let’s streamline it.

Think of all the chemicals it takes to just adjust pH and alkalinity in a swimming pool. Combined with chlorine consumption and backwashing waste, it’s an inefficient system. And yet, it’s the traditional way to manage pool chemistry. Our best customers are the ones who have long believed in the traditional way of doing things…but strived for more. They sought better water quality, better clarity, less chemical use and of course, better margins.

Are you happy with how your pools are managed now? If there were a better way; a more meaningful water chemistry program with less, would you try it? If so, welcome to Natural Pool Products. We’re glad you’re here.